• Genuine Honda Spark Plugs for ACURA, HONDA, AUDI, BMW, DAIHATSU, SUBARU, TOYOTA, SUZUKI, VOLKSWAGEN- 12290PGEA01, 12 12 2 158 252, MN163236- (B00BFDII5U)

    Store: Tiggys

    Spark plugs are crucial components of a vehicle’s ignition system, responsible for igniting the air-fuel mixture in the engine’s combustion chamber. The purpose of spark plugs is to generate the spark needed to ignite the fuel, ultimately powering the engine and enabling the vehicle to run smoothly.

    Using genuine spark plugs is highly recommended for several reasons. Genuine spark plugs are specifically designed and engineered to meet the exact specifications and requirements of the vehicle manufacturer. This ensures compatibility and optimal performance with the vehicle’s engine, leading to improved fuel efficiency, engine performance, and overall reliability.

    The advantages of using genuine spark plugs include:

    1. Enhanced engine performance: Genuine spark plugs are designed to provide consistent and reliable ignition, leading to smoother engine operation and improved performance.

    2. Increased fuel efficiency: Properly functioning spark plugs help to ensure efficient combustion of the air-fuel mixture, resulting in better fuel economy.

    3. Longevity and durability: Genuine spark plugs are made from high-quality materials and undergo stringent testing to ensure durability and longevity, reducing the need for frequent replacements.

    In conclusion, using genuine spark plugs is essential for maintaining the optimal performance, fuel efficiency, and longevity of a vehicle’s engine.

    Specifications
    Type
    SPARK PLUG
    Location
    Engine Compartment
    Earthed Electrode
    1
    Electrode Gap (mm)
    0.7
    Spanner size:
    16
    Thread Lenght (mm):
    19
    Tightening Torque (Nm):
    22
  • Ignition Coil for Toyota Belta- 90919-02240,90919-02265,90919-02229-(B09XVJCKZN)

    Store: Tiggys

    Ignition coils are essential components in a vehicle’s ignition system responsible for converting low voltage power from the battery into high voltage power needed to ignite the fuel-air mixture in the engine’s combustion chambers. The placement of ignition coils varies depending on the engine’s design, but they are typically located near the spark plugs.

    The purpose of ignition coils is to generate the high voltage needed to create a spark at the spark plugs, which ignites the fuel-air mixture in the combustion chambers. This combustion process is what powers the engine and allows the vehicle to run.

    The importance of ignition coils lies in their role in ensuring proper engine performance and efficiency. Without functioning ignition coils, the engine may misfire, leading to decreased power, poor fuel efficiency, and potential damage to other engine components. Properly functioning ignition coils are crucial for maintaining smooth engine operation, optimal fuel combustion, and overall vehicle performance. Regular maintenance and timely replacement of faulty ignition coils are essential to ensure the longevity and efficiency of the vehicle’s ignition system.

  • Inner CV-Joint(left&right) for Toyota Belta, BB, Corolla, Celica-0111-001, 43403-12040- (B00HAOZ2DY)

    Store: Tiggys

    CV-joints, also known as constant velocity joints, are essential components in a vehicle’s drivetrain system. They are responsible for transferring power from the transmission to the wheels while allowing for smooth and flexible rotation at various angles. 

    Compatibility: CV-joints are designed to fit specific vehicle makes and models. It is crucial to ensure compatibility with your vehicle before purchasing a CV-joint to ensure proper fitment and functionality.

    Purpose: The primary purpose of CV-joints is to provide a flexible connection between the transmission and the wheels. They allow the wheels to maintain a constant velocity while accommodating the up-and-down motion of the suspension system. This flexibility is necessary for smooth and efficient power transfer, especially during turns and uneven road surfaces.

    Benefits:

    1. Flexibility and Range of Motion: CV-joints allow the wheels to turn at different angles while maintaining a constant velocity. This flexibility ensures smooth and efficient power transfer, resulting in improved handling and maneuverability.

    2. Reduced Vibrations: CV-joints are designed to absorb and dampen vibrations generated by the drivetrain. By minimizing vibrations, they contribute to a smoother and more comfortable driving experience.

    3. Enhanced Durability: High-quality CV-joints are built to withstand the demands of daily driving. They are designed to handle the stresses and forces exerted during acceleration, braking, and turning, ensuring long-lasting performance and reliability.

    4. Improved Fuel Efficiency: By maintaining a constant velocity and minimizing power loss, CV-joints contribute to improved fuel efficiency. They help optimize the transfer of power from the engine to the wheels, resulting in better fuel consumption.

    5. Reduced Maintenance: Properly functioning CV-joints require less maintenance compared to worn-out or damaged ones. Regular inspection and maintenance of CV-joints can help prevent costly repairs and ensure the longevity of the drivetrain system.

    When considering purchasing CV-joints, it is essential to consult your vehicle’s manufacturer specifications and seek professional advice to ensure compatibility and proper installation. Additionally, selecting high-quality CV-joints from reputable sources will help ensure optimal performance and longevity.

    • Specifications
      Type
      CV-JOINT
      Location
      Front Axle Transmission
      Position
      Inner Left/Right
      A (Teeth)
      23
      A.B.S. (Teeth)
      w/o
      B (Ø, mm)
      34
      C (Teeth)
      23
      L (mm)
      177
  • Inner Right CV-Joint for Toyota Rav4,Alphard-0111-ACA31RH;43030-42070-(B00HAOZHY8)

    Store: Tiggys

    CV-joints, also known as constant velocity joints, are essential components in a vehicle’s drivetrain system. They are responsible for transferring power from the transmission to the wheels while allowing for smooth and flexible rotation at various angles. 

    Compatibility: CV-joints are designed to fit specific vehicle makes and models. It is crucial to ensure compatibility with your vehicle before purchasing a CV-joint to ensure proper fitment and functionality.

    Purpose: The primary purpose of CV-joints is to provide a flexible connection between the transmission and the wheels. They allow the wheels to maintain a constant velocity while accommodating the up-and-down motion of the suspension system. This flexibility is necessary for smooth and efficient power transfer, especially during turns and uneven road surfaces.

    Benefits:

    1. Flexibility and Range of Motion: CV-joints allow the wheels to turn at different angles while maintaining a constant velocity. This flexibility ensures smooth and efficient power transfer, resulting in improved handling and maneuverability.

    2. Reduced Vibrations: CV-joints are designed to absorb and dampen vibrations generated by the drivetrain. By minimizing vibrations, they contribute to a smoother and more comfortable driving experience.

    3. Enhanced Durability: High-quality CV-joints are built to withstand the demands of daily driving. They are designed to handle the stresses and forces exerted during acceleration, braking, and turning, ensuring long-lasting performance and reliability.

    4. Improved Fuel Efficiency: By maintaining a constant velocity and minimizing power loss, CV-joints contribute to improved fuel efficiency. They help optimize the transfer of power from the engine to the wheels, resulting in better fuel consumption.

    5. Reduced Maintenance: Properly functioning CV-joints require less maintenance compared to worn-out or damaged ones. Regular inspection and maintenance of CV-joints can help prevent costly repairs and ensure the longevity of the drivetrain system.

    When considering purchasing CV-joints, it is essential to consult your vehicle’s manufacturer specifications and seek professional advice to ensure compatibility and proper installation. Additionally, selecting high-quality CV-joints from reputable sources will help ensure optimal performance and longevity.

    Specifications
    Type
    CV-JOINT
    Location
    Front Axle Transmission
    Position
    Inner Right
    A (Teeth)
    27
    A.B.S. (Teeth)
    w/o
    B (Ø, mm)
    35.5
    C (Teeth)
    24
    L (mm)
    490.5
  • Left Front Stabilizer link for Toyota Crown Athlete, Mark X, Lexus IS-0123-X2WDL, 48810-30070,ML-T270L-(B00HAOZWZM)

    Store: Tiggys

    A stabilizer link, also known as a sway bar link or anti-roll bar link, is a vital component in a vehicle’s suspension system. Its purpose is to connect the sway bar (also called the stabilizer bar) to the suspension components, typically the control arms or struts. The stabilizer link plays a crucial role in reducing body roll and improving stability during cornering and maneuvering.

    Benefits of a stabilizer link include:

    1. Enhanced Stability: The primary function of a stabilizer link is to minimize body roll or sway when the vehicle is turning or cornering. By connecting the sway bar to the suspension, it helps distribute the weight evenly across all wheels, improving stability and reducing the risk of rollovers.

    2. Improved Handling: A properly functioning stabilizer link enhances the vehicle’s handling characteristics by reducing excessive body roll. This allows for more precise steering control and better overall maneuverability, especially during sudden lane changes or evasive maneuvers.

    3. Increased Safety: By reducing body roll and improving stability, a stabilizer link contributes to safer driving conditions. It helps maintain better tire contact with the road surface, enhancing traction and reducing the likelihood of skidding or loss of control.

    4. Enhanced Comfort: A well-maintained stabilizer link helps minimize excessive body movements, resulting in a smoother and more comfortable ride for the vehicle occupants. It reduces the jolts and vibrations experienced when driving over uneven surfaces or bumps.

    Compatibility of stabilizer links is crucial when purchasing them for your vehicle. It is essential to consider factors such as the make, model, and year of your vehicle to ensure a proper fit. Additionally, checking the specifications and dimensions of the stabilizer link, as provided by the manufacturer or seller, will help ensure compatibility with your vehicle’s suspension system.


    Brand FEBEST
    Auto Part Position Left, Front
    Style Modern
    Vehicle Service Type Truck
    Exterior Finish

    Black


  • Left Rear Upper Arm for BMW 7 Series : 728i, 7 Series : 730i, 7 Series : 740i- 33 32 6 770 059, 33 32 1 090 905- (B00BDVKN6G)

    Store: Tiggys

    The front upper arm of a vehicle is a crucial component of the suspension system that connects the chassis to the wheel hub assembly. Its primary purpose is to control the vertical movement of the wheel and absorb shocks and vibrations from the road surface, thereby ensuring a smooth and stable ride. The front upper arm plays a key role in maintaining proper wheel alignment, steering control, and overall vehicle handling.

    When it comes to the front upper arm of a vehicle, using a genuine component offers several advantages. Genuine front upper arms are specifically designed and engineered by the vehicle manufacturer to meet strict performance and safety standards. They are made from high-quality materials and undergo rigorous testing to ensure durability, reliability, and optimal performance under various driving conditions.

    By using a genuine front upper arm, vehicle owners can have peace of mind knowing that the component is designed to fit seamlessly with the rest of the suspension system, reducing the risk of premature wear, alignment issues, or safety concerns. Genuine front upper arms also typically come with warranties and support from the manufacturer, providing added assurance of quality and performance.

    Specifications
    Type
    ROD, CONTROL
    Location
    Rear Axle Arm/Rod
    Position
    Upper Left
  • Left Tie Rod End For HYUNDAI Tucson, Sonata, KIA Optima, Sportage, Rondo – CE0336L, 56820 2T000 – (B078WPFDS2)

    Store: Tiggys

    Tie rod ends are essential components of a vehicle’s steering system. They connect the steering rack or center link to the steering knuckle, allowing for the controlled movement of the wheels. Here is a description of tie rod ends, their specifications, purpose, reasons for purchasing genuine ones, and their benefits:

    Description:
    Tie rod ends consist of a threaded shaft with a ball joint at one end and a mounting point at the other. They are typically made of high-quality steel or alloy materials to ensure durability and strength. The ball joint allows for smooth articulation and rotation, enabling the wheels to turn in response to steering input.

    Specifications:
    Tie rod ends come in various sizes and designs to fit different vehicle makes and models. It is crucial to select the correct tie rod ends that match the specifications of your vehicle, including dimensions, thread size, and mounting type.

    Purpose:
    The primary purpose of tie rod ends is to facilitate precise steering control and stability. They play a crucial role in transmitting the steering input from the driver to the wheels, allowing for smooth and accurate maneuvering. Tie rod ends also help maintain proper wheel alignment, ensuring even tire wear and optimal handling.

    Reasons for Purchasing Genuine Tie Rod Ends:

    1. Quality and Reliability: Genuine tie rod ends are manufactured to meet the highest standards set by the vehicle manufacturer. They undergo rigorous testing to ensure durability, performance, and longevity. Choosing genuine tie rod ends ensures that you are getting a reliable and high-quality product.

    2. Perfect Fit: Genuine tie rod ends are designed specifically for your vehicle’s make and model. They are engineered to fit seamlessly into the steering system, ensuring proper alignment and optimal performance. This perfect fit minimizes the risk of premature wear or failure.

    3. Warranty Coverage: Genuine tie rod ends often come with warranty coverage, providing you with peace of mind in case of any manufacturing defects or issues. This warranty ensures that you can get a replacement or repair if needed, saving you from additional expenses.

    Benefits of Genuine Tie Rod Ends:

    1. Enhanced Safety: Genuine tie rod ends are built to withstand the demands of daily driving and various road conditions. By using genuine parts, you can trust in their reliability, reducing the risk of steering system failure and potential accidents.

    2. Longevity and Durability: Genuine tie rod ends are made from high-quality materials and undergo strict quality control measures. They are designed to withstand the stresses and forces encountered during steering, ensuring a longer lifespan compared to inferior aftermarket options.

    3. Optimal Performance: Genuine tie rod ends are engineered to meet the precise specifications of your vehicle. By using genuine parts, you can maintain the intended steering response, handling, and overall performance of your vehicle.

    When purchasing tie rod ends, it is recommended to consult your vehicle’s manufacturer or a trusted automotive professional to ensure you select the correct parts for your specific vehicle model.

    Specifications
    Type
    TIE ROD END
    Location
    Steering system
    Position
    Left
  • Mitsubishi L200 front upper ball joint(left&right)-(FeBest 0420-901)- 4010A138,4010A056-(B00HAP61PQ)

    Store: Tiggys

    A Front upper ball joint is a crucial component of a vehicle’s suspension system. It is usually attached to the lower control arm and the sterring knuckle and its primary function is to connect these two partsand allow for smooth movement and rotation. The main benefits of a genuine front lower ball joint: 1.DURABILITY: Genuine ball joints are made from high-quality materials, ensuring their longevity and ability to withstand the constant stresses and strains experienced during vehicle operation. 2.SAFETY: The ball joint plays a crucial role in maintaining the stability and control of the vehicle’s steering and suspension. Genuine ball joints are designed and manufactured to meet strict safety standards , ensuring optimal performance and and minimizing the risk of accidents or component failure. 3. FIT and COMPATIBILITY: Genuine ball joints are designed to fit perfectly with the specific make and model of the vehicle, ensuring proper alignment and operation. They also guarantee compatibility with other suspension components, minimising the risk of issues or complications during installation. 4. PERFORMANCE: Genuine ball joints are engineered to provide the intended performance characteristics, ensuring smooth and responsive steering and suspension movement. This can contribute to improved handling, stability and overall driving experience. 5. WARRANTY and SUPPORT: When using genuine ball joints, customers often benefit from warranty coverage and support from the manufacturer or authorized dealers. This can provide added peace of mind and assistance in case of any issues or concerns.

  • Outer CV-Joint (left/right) For Honda Fit, Aria,Jazz City- 0310-059,44014-SEL-T00,44014-SAB-N21-(B00HAOT3K2)

    Store: Tiggys

    CV-joints, also known as constant velocity joints, are essential components in a vehicle’s drivetrain system. They are responsible for transferring power from the transmission to the wheels while allowing for smooth and flexible rotation at various angles. 

    Compatibility: CV-joints are designed to fit specific vehicle makes and models. It is crucial to ensure compatibility with your vehicle before purchasing a CV-joint to ensure proper fitment and functionality.

    Purpose: The primary purpose of CV-joints is to provide a flexible connection between the transmission and the wheels. They allow the wheels to maintain a constant velocity while accommodating the up-and-down motion of the suspension system. This flexibility is necessary for smooth and efficient power transfer, especially during turns and uneven road surfaces.

    Benefits:

    1. Flexibility and Range of Motion: CV-joints allow the wheels to turn at different angles while maintaining a constant velocity. This flexibility ensures smooth and efficient power transfer, resulting in improved handling and maneuverability.

    2. Reduced Vibrations: CV-joints are designed to absorb and dampen vibrations generated by the drivetrain. By minimizing vibrations, they contribute to a smoother and more comfortable driving experience.

    3. Enhanced Durability: High-quality CV-joints are built to withstand the demands of daily driving. They are designed to handle the stresses and forces exerted during acceleration, braking, and turning, ensuring long-lasting performance and reliability.

    4. Improved Fuel Efficiency: By maintaining a constant velocity and minimizing power loss, CV-joints contribute to improved fuel efficiency. They help optimize the transfer of power from the engine to the wheels, resulting in better fuel consumption.

    5. Reduced Maintenance: Properly functioning CV-joints require less maintenance compared to worn-out or damaged ones. Regular inspection and maintenance of CV-joints can help prevent costly repairs and ensure the longevity of the drivetrain system.

    When considering purchasing CV-joints, it is essential to consult your vehicle’s manufacturer specifications and seek professional advice to ensure compatibility and proper installation. Additionally, selecting high-quality CV-joints from reputable sources will help ensure optimal performance and longevity.

    Specifications
    Type
    CV-JOINT
    Location
    Front Axle Transmission
    Position
    Outer Left/Right
    A (Teeth)
    28
    A.B.S. (Teeth)
    w/o
    B (Ø, mm)
    52
    C (Teeth)
    26
    L (mm)
    133
  • Outer CV-Joint for Toyota Rush, Terios-(LEFT)–(43420-B4010) (B00HAOYBBI

    Store: Tiggys

    CV-joints, also known as constant velocity joints, are essential components in a vehicle’s drivetrain system. They are responsible for transferring power from the transmission to the wheels while allowing for smooth and flexible rotation at various angles. 

    Compatibility: CV-joints are designed to fit specific vehicle makes and models. It is crucial to ensure compatibility with your vehicle before purchasing a CV-joint to ensure proper fitment and functionality.

    Purpose: The primary purpose of CV-joints is to provide a flexible connection between the transmission and the wheels. They allow the wheels to maintain a constant velocity while accommodating the up-and-down motion of the suspension system. This flexibility is necessary for smooth and efficient power transfer, especially during turns and uneven road surfaces.

    Benefits:

    1. Flexibility and Range of Motion: CV-joints allow the wheels to turn at different angles while maintaining a constant velocity. This flexibility ensures smooth and efficient power transfer, resulting in improved handling and maneuverability.

    2. Reduced Vibrations: CV-joints are designed to absorb and dampen vibrations generated by the drivetrain. By minimizing vibrations, they contribute to a smoother and more comfortable driving experience.

    3. Enhanced Durability: High-quality CV-joints are built to withstand the demands of daily driving. They are designed to handle the stresses and forces exerted during acceleration, braking, and turning, ensuring long-lasting performance and reliability.

    4. Improved Fuel Efficiency: By maintaining a constant velocity and minimizing power loss, CV-joints contribute to improved fuel efficiency. They help optimize the transfer of power from the engine to the wheels, resulting in better fuel consumption.

    5. Reduced Maintenance: Properly functioning CV-joints require less maintenance compared to worn-out or damaged ones. Regular inspection and maintenance of CV-joints can help prevent costly repairs and ensure the longevity of the drivetrain system.

    When considering purchasing CV-joints, it is essential to consult your vehicle’s manufacturer specifications and seek professional advice to ensure compatibility and proper installation. Additionally, selecting high-quality CV-joints from reputable sources will help ensure optimal performance and longevity.

  • Pair (2) of Front Engine Mount (left&right) for BMW X5 : X5 xDrive 30d – 22 11 6 853 104, 22 11 6 853 103 – (B0CW8GQHHQ)

    Store: Tiggys

    Engine mounts are components that secure the engine to the vehicle’s chassis and absorb vibrations and shocks generated by the engine during operation. They play a crucial role in supporting the engine’s weight, reducing noise and vibrations, and isolating the engine’s movements from the rest of the vehicle.

    The placement of engine mounts varies depending on the vehicle’s design, but they are typically located between the engine and the vehicle’s frame or subframe. Engine mounts are designed to withstand the engine’s weight and the forces generated during acceleration, braking, and cornering.

    When it comes to compatibility, it is essential to ensure that the engine mounts are compatible with the specific make and model of the vehicle. Using compatible engine mounts designed for your vehicle ensures proper fitment and functionality, reducing the risk of premature wear or failure.

    The purpose of engine mounts is to:

    1. Support the engine’s weight and maintain its position within the vehicle.
    2. Absorb and dampen vibrations and shocks generated by the engine, reducing noise and improving ride comfort.
    3. Isolate the engine’s movements from the rest of the vehicle, preventing excessive vibrations from affecting other components.

    The benefits of using high-quality engine mounts include:

    1. Improved ride comfort: Properly functioning engine mounts help reduce vibrations and noise, leading to a smoother and more comfortable driving experience.
    2. Enhanced vehicle performance: Engine mounts play a crucial role in maintaining the engine’s stability and alignment, ensuring optimal performance and efficiency.
    3. Longevity: Using durable and compatible engine mounts can help extend the lifespan of the engine and other vehicle components by reducing wear and tear caused by excessive vibrations.
    4. Safety: Engine mounts contribute to the overall safety and stability of the vehicle by securely holding the engine in place and preventing excessive movement that could lead to accidents or damage.

    Overall, investing in high-quality, compatible engine mounts for your vehicle can lead to improved ride comfort, enhanced performance, longevity, and safety. Regular inspection and maintenance of engine mounts are essential to ensure their proper functioning and prevent potential issues.

  • Pair of Front Lower Arm (left&right) for LEXUS GS300, GS450H, IS350, TOYOTA Crown Athlete, Mark X- 48640-30290, 48640-30290- (B0CR8FWNKL)

    Store: Tiggys

    The lower arm, also known as the control arm or wishbone, is a vital component of a vehicle’s suspension system. It plays a crucial role in connecting the chassis to the wheel hub, allowing for controlled movement and maintaining proper alignment. Here is a description of the lower arm, its purpose, specifications, variety, benefits, and the importance of using genuine parts:

    Description: The lower arm is a sturdy, metal component that resembles a triangular or wishbone shape. It is typically made of forged or cast aluminum or steel, ensuring strength and durability. The lower arm is equipped with bushings or ball joints at its connection points, allowing for smooth and controlled movement.

    Purpose: The primary purpose of the lower arm is to provide support and control the vertical movement of the suspension system. It helps to absorb shocks and vibrations from the road, ensuring a comfortable and stable ride. Additionally, it assists in maintaining proper wheel alignment, tire contact with the road surface, and steering responsiveness.

    Specifications: Lower arms are designed to meet specific vehicle requirements, including dimensions, mounting points, and load-bearing capacity. These specifications vary depending on the make, model, and year of the vehicle. It is crucial to select the correct lower arm that matches the vehicle’s specifications to ensure proper fitment and performance.

    Variety: Lower arms are available in various designs and configurations to accommodate different suspension systems and vehicle types. Some vehicles may have a single lower arm per wheel, while others may have multiple arms or complex multi-link setups. The variety ensures compatibility with different suspension geometries and vehicle designs.

    Benefits: Using a high-quality lower arm offers several benefits, including:

    1. Improved Handling and Stability: A properly functioning lower arm helps maintain proper wheel alignment, resulting in improved handling, stability, and control of the vehicle.

    2. Enhanced Comfort: The lower arm’s ability to absorb shocks and vibrations contributes to a smoother and more comfortable ride for the occupants.

    3. Extended Tire Life: By maintaining proper wheel alignment, the lower arm helps prevent uneven tire wear, extending the lifespan of the tires.

    Importance of Genuine Parts: It is crucial to use genuine lower arms and other original equipment manufacturer (OEM) parts for several reasons:

    1. Quality and Reliability: Genuine parts are manufactured to meet the highest quality standards and specifications set by the vehicle manufacturer. They are designed to fit and function seamlessly, ensuring optimal performance and reliability.

    2. Warranty Coverage: Genuine parts often come with warranty coverage, providing assurance and protection against defects or failures.

    3. Compatibility and Safety: Genuine parts are specifically engineered for the vehicle’s make and model, ensuring proper fitment and compatibility. This helps maintain the vehicle’s safety standards and reduces the risk of accidents or malfunctions.

    4. Longevity and Resale Value: Genuine parts are built to last, offering durability and longevity. Using genuine parts can help preserve the vehicle’s resale value and ensure its long-term reliability.

    In conclusion, the lower arm is a critical component of a vehicle’s suspension system, providing support, control, and alignment. Using genuine lower arms and other OEM parts is essential for optimal performance, safety, and longevity of the vehicle.

    Specifications
    Type
    ARM ASSY, SUSPENSION
    Location
    Front Axle Arm/Rod
    Position
    Lower Left&right

Main Menu

× Welcome!